Hasco aerozolis
HASCO A 7002 / 1000 tepalas
Hasco Z265 formų aerozolis
HASCO Z 264 Silikono aerozolis
| Originalus produktas | Siūloma alternatyva |
|
Aerozoliai
|
|
|
HASCO Z 260 |
Molyduval Pegasus UM 2 HV |
| HASCO Z 261 | Molyduval Polypan Spray |
| HASCO Z 262 | Molyduval Tutela 31 Spray |
| HASCO Z 263 | Molyduval Cleaner Spray |
| HASCO Z264 | Molyduval Silikon Spray |
| HASCO Z 265 | Molyduval Emulator Spray |
| HASCO Z 267 | Molyduval Ferroxin Spray |
| HASCO Z 269 | Molyduval Tutela 33 Spray |
| HASCO A 7002 / 1000 | Molylub Plasma Pin Grease |
Tikslesnis pakeičiamumas – pagal Jūsų įrangos originalias tepimo rekomendacijas ir jos darbo sąlygas
The special lubricating grease A 7002 /. . .
is recommended for reliable, conservative lubrication of the plasma-nitrided
ejector pins Z 412 /. . . .
The additional lubrication further
prolongs the service life of the ejectors.
The special lubricating grease developed for the Z412/… is also excellent
for other moving tool parts. The grease
must be applied thinly.
Special
Features
– High economicalness.
– Increased service life.
– Specially developed for injection
moulds and casting dies.
– Excellent emergency running
properties due to mixed solid
lubricant and additives.
– No contamination of parts by
lubricants or abraded material.
– Silicone-free and usable
up to 1400 °C.
– Corrosion-retardant.
– Water-resistant
HASCO A 7002 / 1000 tepalas
Hasco Z265 formų aerozolis
HASCO Z 264 Silikono aerozolis
| Originalus produktas | Siūloma alternatyva |
|
Aerozoliai
|
|
|
HASCO Z 260 |
Molyduval Pegasus UM 2 HV |
| HASCO Z 261 | Molyduval Polypan Spray |
| HASCO Z 262 | Molyduval Tutela 31 Spray |
| HASCO Z 263 | Molyduval Cleaner Spray |
| HASCO Z264 | Molyduval Silikon Spray |
| HASCO Z 265 | Molyduval Emulator Spray |
| HASCO Z 267 | Molyduval Ferroxin Spray |
| HASCO Z 269 | Molyduval Tutela 33 Spray |
| HASCO A 7002 / 1000 | Molylub Plasma Pin Grease |
Tikslesnis pakeičiamumas – pagal Jūsų įrangos originalias tepimo rekomendacijas ir jos darbo sąlygas
The special lubricating grease A 7002 /. . .
is recommended for reliable, conservative lubrication of the plasma-nitrided
ejector pins Z 412 /. . . .
The additional lubrication further
prolongs the service life of the ejectors.
The special lubricating grease developed for the Z412/… is also excellent
for other moving tool parts. The grease
must be applied thinly.
Special
Features
– High economicalness.
– Increased service life.
– Specially developed for injection
moulds and casting dies.
– Excellent emergency running
properties due to mixed solid
lubricant and additives.
– No contamination of parts by
lubricants or abraded material.
– Silicone-free and usable
up to 1400 °C.
– Corrosion-retardant.
– Water-resistant
A7002/V Hasco
Hasco Z 265 / Trennmittel
Multi-purpose, non-silicone release agent for all kinds of plastics processing, such as injection-, compression- and blow moulding etc. It is suitable for thermoplastic, thermoset plastic and elastomer processing. Prefereably used for parts requiring subsequent surface treatment, such as printing, painting, galvanizing etc. No physiological side effects, biodegradable, no layering. For temperatures up to 200°C. Easily removed by water based cleaner.
Makes dismantling of mecha nically linked parts easier. Dissolves tenacious rust due to highest penetration ability. Offers protection against corrosion. Removes, grease, tar, dirt and dust.
Special Features – High economicalness. – Increased service life. – Specially developed for injection moulds and casting dies. – Excellent emergency running properties due to mixed solid lubricant and additives. – No contamination of parts by lubricants or abraded material. – Silicone-free and usable up to 1400 °C. – Corrosion-retardant. – Water-resistant