Sintetinis suvirinimo skystis

ATGAL

Suvirinimo apsauginiai aerozoliai

Rūšis

Spalva

Pagrindas

Panaudojimas, savybės

Molyduval

Orgon P Spray

skaidri

Sint Ester

POE

Biologinės sintetinės apsaugos nuo tiškalų alyvos aerozoliai.

Sintetinių esterių pagrindo suvirinimo operacijų apsauginio skysčio aerozolis. Padeda išlaikyti MIG / TIG suvirinimo degiklių antgalius švarius nuo užsikimšimo, trukdo suvirinimo metu susidarančių kibirkščių lašelių prilipimą prie dujų reguliatoriaus / purkštuko. Ypač tinkamas didelio ploto suvirinimo stalų supurškimui, antgalių apdorojimui sandėliuojant.

Molyduval ANTI-SPATTER SPRAY

Water Based Weld-Spatter Agent

DESCRIPTION

Anti-Spatter Spray is a water based, paintable, cost effective and non-flammable agent for the prevention of weld-spatter adhering to metal surfaces during the welding process.

Anti-Spatter Spray has outstanding performance preventing spatter sticking to a wide range of steels, including mild steel, stainless, steels and aluminium.

Anti-Spatter Spray avoids the need for mechanical abrasion or grinding of weld spatter following welding. It contains corrosion inhibitors for base metal protection. Calguard increases the life of torch components saving time and money. Eliminates spatter build up which results in poor gas flow causing pitting, porosity and burnbacks.

DIRECTIONS FOR USE

Welding Torch

Spray Anti-Spatter Spray before welding in a thin and uniform film onto the areas to be protected. Hold spray can approximately 30 cm from the surface to be protected. Also use the spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers and the base of the nozzle support as well.

Base Metal

Spray Anti-Spatter Spray hold spray can approximately 30cm from surface to be protected.

Spray a thin uniform coating. Do not over apply solution as excessive solution application may be detrimental to the weld quality.

Application Methods

Hand held spray applicator for welding torch components and base metal areas. Wiping and mopping may be used for base metal large areas.